---
title: "Manual Run"
slug: "manual-run"
updated: 2025-02-06T20:49:30Z
published: 2025-02-06T20:49:30Z
canonical: "success.panaya.com/manual-run"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://success.panaya.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Manual Run

This article describes how to manually pass or fail a **Test Step without using the Panaya Testing Tool**. You can attach one or more images or documents to support your manual run.

1. Open up a test and select the **Steps tab.**
2. **Highlight the Step** you wish to run manually. Use the **Ctrl** or **Shift** keys to **multi-select** Steps.
3. Click on the **Manual** Run button.

![](https://cdn.document360.io/f404076c-de23-4609-848e-2dfd4ef701b0/Images/Documentation/image-1722540769424.png)
4. Select whether the Test has **Passed**, **Failed,** or is **In Progress.** **Filling in the Actual results and relevant comments is highly recommended****.** Add a **Comment (6)** for any stakeholders involved, such as the Reviewer. You can **Drop or Paste multiple images or documents** as **Evidence (7)** To learn how to **enforce** adding images or documents as evidence, [click here](/v1/docs/how-to-enforce-test-evidence)

![](https://cdn.document360.io/f404076c-de23-4609-848e-2dfd4ef701b0/Images/Documentation/image-1722540818250.png)
5. Click **Save** or **Save and report the defect.**

Manually passed or failed Steps will appear with the corresponding **uploaded attachment as Test Evidence** under the [**All Runs tab**](/v1/docs/where-can-i-view-the-test-evidence-1) (**Highlight** a Step and then select **View Step**).Manually passed or failed steps with no attached evidence will appear in the [**All Runs tab**](/where-can-i-view-the-test-evidence-1) with no corresponding evidence, as shown below.

![](https://cdn.document360.io/f404076c-de23-4609-848e-2dfd4ef701b0/Images/Documentation/image-JIRAZR7H.png)

**Good to Know!** Select **multiple Steps** using the **Ctrl** or **Shift** keys, then use the **Manual Run** button to **pass** or **fail** multiple Steps